After cutting the foot board into with the skill saw, we attached it to the head board with wood screws. These were attached from the back side of the head board. The next step was putting a board across the front to attach the sides. This board is also where the 1x4's will be attached later for the seat. After this was squared and screwed into the sides of the foot board, it was ready for paint. I applied 3 coats of Paint Couture's Angelic. Here's a pic of the painted bench at this point.
I liked the detail on this bed and I decided to use Light Brown Sugar Glaze by Paint Couture. Glazes are great products to use when you have detail and it gives depth to the piece. I sanded this lightly and then applied the glaze. The next step is cutting the boards for the seat area of the bench. We used 1x4's and after cutting fifteen, we sanded and stained them with a dark brown glaze. We decided that we wanted the boards to extend over the front about a 1/2" and in the back another 1/2". If you've not used glaze to stain wood, I highly recommend it. The glazes we sell are odor free and clean up with soap and water. They come in several different colors and are very easy to use.
After the wood pieces dried we used the Ryobi power stapler to attach the boards. This part of the project was probably the hardest. Why? The spacing was tricky and it took a lot of time to get them "just right"! If you have any questions about the construction of the bench just leave me a comment and I'll try to answer.
And this is the final pictures of our bench we made from a full size bed. I enjoyed doing this project and I have another bed in storage that may get transformed too! All of the products used in this post were from Fresh Finds, LLC in Jasper. You can visit us from 9-5 everyday except Tuesday's. We also have a store online, that you can visit everyday.